Over time, debris can build up on the charging contacts of the Robot and the Dock. Follow these simple steps to clean the charging contacts about once a month or when dirty.
Note: Use a lightly dampened melamine foam such as a Magic Eraser, or a lightly dampened cloth to clean the contacts. These are the only two acceptable materials that should be used to clear the contacts. Do not use any abrasive material to clean the contacts.
If you have a Roomba® 100/1000, Plus 400, Plus 500, and Max 700 Series, please click here.
Note: Essentials 2 is unique. All Roomba models have similar charging contacts, except for the Essentials 2. For help cleaning the charging contacts on the Roomba Essentials 2, visit How to Clean the Charging Contacts: Roomba® 2 Essential Robot + AutoEmpty™ Dock.
Roomba® 205 DustCompactor™ Vac/Combo | How to Clean the Charging Contacts and Sensors
How to Clean the Contacts:
- Unplug the Dock and wait 60 seconds
- Remove the robot from the charging station and place the robot upside down on a flat surface
- Grab a lightly dampened melamine foam such as a Magic Eraser, or a lightly dampened cloth
- Clean the charging contacts on your robot. They should have a visible shine.
 |  |  |
| Robot Charging contacts | Home Base charging contacts | Clean Base charging contacts |
Note: Use a lightly dampened melamine foam such as a Magic Eraser, or a lightly dampened cloth to clean the contacts. These are the only two acceptable materials that should be used to clear the contacts. Do not use any abrasive material to clean the contacts.Note: Damaged contacts could also prevent your robot from charging. If the contacts are green or copper colored, they are damaged and the robot or base with the damaged contacts needs to be replaced. Please contact iRobot Customer Care.
Docking Sensor
Wipe the docking sensor window on the Home Base® with a clean, dry microfiber or soft cotton cloth. Do not use a magic eraser here.
M6 Drip Tray:
It is best for the customer to regularly clean off the drip tray when using the Braava jet® m Series robot. Debris and water residue can affect the performance of the robot.
- The drip tray can be cleaned with a wet cloth or rinsed in the sink
- Dry the drip tray thoroughly with a soft cloth before reattaching it
- The drip tray is NOT dishwasher safe!
Charging Contacts | Clean Base Auto-Fill Dock™ and Auto-Wash™ Dock
- Clean the Charging Contacts, IR Window, and Visual Docking Target regularly
- Inspect the components to make sure that they are clear of debris. Wipe with a clean, dry cloth.
Important: Do not spray cleaning solution or water onto the sensors or sensor openings.
Note: To expose the charging contacts, press and hold the contact button.
 |  |  |
| Charging Contacts | IR Window | Visual Docking Target |
Charging Contacts | Auto-Wash™ Dock
- Clean the Charging Contacts, IR Window, and Visual Docking Target regularly
- Inspect the components to make sure that they are clear of debris. Wipe with a clean, dry cloth.
Important: Do not spray cleaning solution or water onto the sensors or sensor openings.
Note: To expose the charging contacts, press and hold the wheel switches.
 |  |  |
| Charging Contacts | IR Window | Visual Docking Target |
